👉 Get £500 Off Your New Tesla – Click Here to Claim
Whether you're rotating tyres, fitting new wheels, or doing a quick inspection, knowing how to jack up your Tesla safely is essential. Unlike most cars, Teslas require the use of jack pucks (also known as lift pads) to protect the battery and underbody from damage.
Here’s a step-by-step guide for using jack pucks properly and avoiding costly mistakes.
⚠️ Why You Must Use Jack Pucks on a Tesla
Tesla vehicles have a large, delicate battery pack that sits low in the chassis. If you place a jack or lift incorrectly, you risk damaging the battery or bodywork, and that’s not cheap to fix.
Jack pucks slot into the dedicated lifting points under the car, helping align the jack and distribute pressure safely. They’re a must-have for any DIY Tesla maintenance.
🧰 What You’ll Need
- 4x Tesla-compatible jack pucks (one per lifting point)
- Hydraulic trolley jack or scissor jack
- Flat, stable surface (avoid gravel or slopes)
- Wheel chocks or bricks (for extra safety)
- Gloves and a torch (optional but helpful)
🛠 Step-by-Step: How to Jack Up Your Tesla Safely
- Park Safely
Engage Park, activate the handbrake (if not automatic), and ensure the car is on a flat, solid surface. - Locate the Lifting Points
Look under the side skirts near each wheel, you’ll see a round indentation with a small hole. This is where the jack puck goes. - Insert the Jack Puck
Push the puck into the lifting hole until it clicks or feels firmly seated. The rubber base will hang slightly below the car’s sill. - Position the Jack
Place your trolley jack directly beneath the jack puck. The puck will centre the jack cup and protect the underbody. - Jack Up the Car
Pump the jack slowly, keeping an eye on alignment. Lift only as high as you need. Never crawl under the car unless it's properly supported with axle stands. - Lower Carefully
Once your work is done, slowly release pressure on the jack and remove the puck.
⚙️ Important Tips for Jacking a Tesla
- Only jack one corner at a time unless you're using a lift or four-point setup
- Never lift without using proper jack pads, you can cause serious damage
- For tyre shops or garages, always mention Tesla’s lifting points and ask them to use pucks
- If lifting both sides, ensure the car is supported by properly rated axle stands
🧳 Storing Your Jack Pucks
Keep a set of jack pucks in your glovebox or frunk. They’re small, lightweight, and easy to forget until you need them, but essential if you ever use a tyre shop, mobile fitter, or roadside repair.
💬 Final Thought
Jacking up a Tesla is simple once you know how, but it’s easy to get wrong if you're not aware of the lifting points. A quick investment in proper jack pucks could save you thousands in underbody or battery repairs.
💰 Ordering a Tesla soon? Use my referral link to get £500 off your new Model 3 or Model Y.